Digital Validation Platform: Watch the Webinar

Logo Rephine x VG Web 1

About this Webinar

Many teams have a validation strategy. Fewer have a digital validation platform that turns it into daily practice. This webinar closes that gap.

Juan Torrijos from Rephine and Peter Liang from ValGenesis start with what a digital validation platform must do. They set out eight domains as vendor-neutral requirements, not features. Then they test those requirements in three live, scenario-led demos: scoping a change, paperless execution, and change control supported by AI.

You also get five questions to ask any supplier, plus a 15-minute Q&A on regulation, implementation and the platform. Along the way, you see how EU GMP Annex 11 and 21 CFR Part 11 become requirements you can test.

What you will learn in this digital validation platform webinar

By the end, you will have a clear way to judge any platform against your own needs. You will also see how the pieces fit together.

  • Eight domains: what a platform must cover, from system lists to security and supplier checks.
  • Five supplier questions: they tell a true platform from a document store, and show what a strong answer sounds like.
  • Scoping a change: scope a vendor update that hits 60 of 180 interfaces, then see what the inspector sees.
  • Paperless execution: live protocol runs, review workflows and deviations logged in the same system.
  • AI support: see how AI can help with the same change, so the validated state stays current.
  • Rules in practice: how EU GMP Annex 11 and 21 CFR Part 11 turn into tests you can run.

The session ends with 15 minutes of questions. Rephine answers on the rules and on getting started, while ValGenesis answers on the platform. You also get the Platform Evaluation Checklist, built from the needs behind the eight domains.

Five questions to ask any validation software supplier

Ask these questions, then watch how long the answers take.

  1. Can the system build the traceability matrix, or does someone assemble it?
  2. Does it hold the rationale of a risk decision, or only the outcome?
  3. Can someone edit a test step after the test closes?
  4. Can it produce the inspection pack for one system today, without a project?
  5. Does a change trigger an impact assessment, or a calendar reminder?

Question three has one right answer, and it is no.

Meet the speakers

1
2 2

Juan Torrijos, Rephine
Pharmaceutical Consultant and VLMS Technical Manager. Juan brings more than 15 years in the life sciences industry, leading CSV, data integrity and internal audit projects in regulated environments. He designs and implements remediation plans and GxP training programmes, and partners with pharmaceutical and biotechnology companies to digitalise their validation processes and move away from paper-based systems.

 Peter Liang, ValGenesis
Solution Engineer with more than five years in quality control and cleaning validation. Peter supports validation lifecycle initiatives for pharmaceutical and biopharmaceutical clients and works on integrating AI within ValGenesis’s Validation Lifecycle Management System. He holds a degree in biochemistry from the University of Waterloo.

Press play below to watch the full session, and keep reading for the detail behind each topic.

Agenda

0–2 min
Welcome and introductions

2–5 min 
Where we left off: recap of webinar 1

5–12 min 
What a digital validation system must do

12–22 min 
Demo 1: the 60-interface problem

22–29 min 
Demo 2: paperless execution

29–34 min
Demo 3: change control supported by AI

Ready to see how it works in practice?

Whether you are comparing platforms, planning a move away from paper or preparing for an inspection, our team can help. Talk to Rephine about your digital validation platform needs, from choosing a system to getting it live.

View our other resources and company news

Scroll to Top

Is your quality ready for 2027?

Learn what our GxP experts saw first-hand across 2026, what to prioritise in 2027, and benchmark where your organisation stands today.